39.25"w 6"d 80"h | Vault Doors | NEW ADA Size

Most Popular

• 3/8" Door
• 8"x12" Stainless Door Upgrade

These are the most popular options customers order. Perfect for those who want to slow down high powered tools (grinders, sawzalls etc.) from breaching the safe. 

More Steel

• 3/8" Door
• 8"x12" Stainless Door Upgrade
• Full 3/16" Door Reinforcement

The more steel, the better. Perfect for the customer who wants to add to the break in time required with high power tools in the areas it matters most. The entire 3/8" plate door will be covered in a 3/16" plate, bringing the total door thickness to 9/16".

Stainless Steel

• 3/8" Door
• 8"x12" Stainless Door Upgrade
• Full 3/16" Stainless Door Reinforcement

Torch attacks happen and when they do you will be ready with the full coverage of this 3/16" thick stainless steel plate. Adds about 4x the break in time with any high power tool. One layer of 3/16" Stainless performs like 9/16" non stainless. It's the ultimate in security for torch resistance (or any other cutting tool), without all the weight of resorting to a cement filled vault.

2300° Fire Insulator

The interior is stuffed with 2.5" of 2300° 8 lb. density ceramic wool and 1"- 2”of fiberglass blanket. Then it's compressed by a 16 gauge inside steel liner. If you do not add this option the safe will have no fire insulator. 

Panic Button

This will allow you to lock yourself inside the vault with the push of a palm button as you would need for a panic room. Pulling the button unlocks. With the push button engaged it is impossible to spin the dial from the outside, thus preventing anyone from locking you inside. If you did not engage the push button and someone was to lock you in by spinning the dial on the outside (which is a very purposeful act) it would require 3 minutes of work and a couple of basic tools to get out.  

Twin Lock System- One Spin, One Electronic

Adds 2x the locksmith entry time assuming both locks were locked. Comes with one S&G 6730 spin dial and one S&G Titan D-Drive electronic. Both dials need to be in working condition and unlocked in order to get in. One dial does not override the other. 

Twin Lock System- Two Spin

Adds 2x the locksmith entry time assuming both locks were locked. Comes with two S&G 6730 spin dials. Both dials need to be in working condition in order to get in. One dial does not override the other.

D-Drive Electronic Lock 

These type 1 electronic dials by S&G have less moving parts and boast a longer lifespan. Fewer parts = less potential to break. These are warranted for two years including locksmith entries.

Key In Dial 

Stops the dial from spinning. Comes in handy if you intended on randomly locking someone out who has the combination. This is not to be used as a quick access into the safe! Not compatible with electronic locks.

Locksmith Resistant Hard Plate Upgrade 

A hard plate comes standard with every Sturdy Safe however this option is designed to slow down locksmith entries. It's a diamond /carbide bit resistant machine tool pin hard plate that is as hard as ball bearings. For this option you would need to believe a burglar is smart enough to know locksmith entries. THIS VOIDS LOCKSMITH ENTRY COVERAGE ON THE  WARRANTY.

Handgun Hangers 

Store More Gun hand gun hangers available! Store your pistols with 100% use of your shelving space. These are much better than door organizers simply because you do not need to cut down the gun rack or shelving about 4" to accommodate them. They fit as small as .22 caliber, or larger. Vinyl coated and made in the USA! 

Dri Rod Dehumidifier  

This option is great for safes located next to an outlet. Just plug it in and forget about it. Dehumidifies the safe by regulating the temperature inside.

Eva Dry 

This dehumidifier requires more work than the Dri Rod. However, it comes in handy if you are NOT placing the safe next to an outlet. It sucks moisture out of the air in the driest climates. Once indicator says it's wet, you must plug it into an outlet for 10-12 hours till it's dry enough to put back in the safe.

Extra Warranty

The extra warranty covers shipping, locksmith entry and repair/replacement in the event of a burglary. The standard warranty already covers shipping, locksmith entry and repairs/replacement in the event of malfunctioning and fire (for fire lined safes).

Dark Gray and Black 

This is the new semi gloss textured paint color that comes standard. Because of the speckling it's easy to touch up without noticing and hides smudges.

Matte and Gloss Black

Solid black is boring so we brought on the textured speckling again with a matte and semi gloss black combo. Because of the speckling it's easy to touch up without noticing and hides smudges.

Black Diamond Plate

• Added 10g diamond plate around the top and bottom of the door.
• Left the handle chrome and dial black.
• Added a pull bar with diamond shaped ends.
• Flat and semi gloss black texture paint

Distressed Metal

• Weld rivet detailing around the whole door.
• Distressed the handle and black dial.
• Added a pull bar.
• Clear coated.
• Ground strategic markings so no two distressed vaults will look alike.

Antique Vault Finish

• Weld rivet detailing around the whole door. Inswing Vaults will also have small 10g plates with weld rivets added to the frame.
• Chrome handle and silver dial.
• Added a pull bar.
• Flat dark brown texture paint. The 8x12" plate will be left silver.

Old Hollywood Finish

• Weld rivet detailing around the whole door. Inswing Vaults will also have small 10g plates with weld rivets added to the frame. 
• Chrome handle and black dial.
• Added a pull bar.
• Flat and semi gloss black texture paint. All weld rivets and 8x12" plate will be left silver. 

 ∙  If you ordered a package that includes the 8x12" Stainless Plate around the dial it will come as pictured above, but the 8x12" Stainless Plate is not automatically included in any finish option. 

 ∙ These designs are completely customizable so ask to add your name, logo, crest or anything else. Have your own design idea? We can do that too.